SAIVS
  • HOME
  • ABOUT US
    • Honor
    • Manufacturing Capacity
    • Privacy Policy
    • Terms of Service
    • FAQ
  • PRODUCTS
    • Hydraulic Pumps
      • Rexroth
        • A2F Series
        • A4 F/V Series
        • A7VO Series
        • A8VO Series
        • A10V Series
        • A11V Series
        • PG Series
        • AZ Series
        • PV Series
      • Parker
        • PV-plus Series
        • P1 PD Series
        • PAVC Series
        • VP1 Series
        • PG Series
        • P2 P3 Series
      • Sauer-Danfoss
        • 45 Series
        • 90 Series
      • Eaton Vickers
        • PVM Series
        • PVH Series
        • PVQ Series
        • PVE Series
        • VMQ Series
      • Nachi
        • PVD Series
        • PVK Series
        • PVS Series
        • PZS Series
        • PZ Series
      • Hawe
        • V30 Series
        • V60N Series
      • Kawasaki
        • K3V Series
        • K5V Series
      • Sumitomo
        • QT Series
      • Linde
        • MPR Series
        • HPV-02 Series
        • HPR-02 Series
      • Vane Pumps
      • Gear Pumps
    • Hydraulic Motors
      • SAI GM Series Motor
      • Intermot Piston Motor
      • Hydraulic Cycloidal Motors
      • Rexroth Hydraulic Motor
      • Poclain Hydraulic Motor
    • Hydraulic Valves
      • Pressure Relay
      • Pressure Valve
      • Threaded Cartridge Valve
      • Flow Valve
      • Anti-explosion Valve
      • Proportional servo valve
      • Direction Valve
      • Directional Control Valves
    • Planetary Gearboxes
      • Rexroth
      • Bonfiglioli
      • Brevini
      • Dinamicoil
      • O&K
    • Hydraulic Cylinder
      • Aerial Work Platforms
      • Agricultural Equipment
      • Construction Equipment
      • Manufacturing Equipment
      • Marine
      • Material Handling
      • Mining
      • Road Service
      • Waste/Recycling
      • Cylinder Parts
    • Hydraulic Power Units
      • Scissor High Altitude Platform
      • Pallet Car
      • The Wing Car
      • Lift Platform
      • Automobile Tail Plate
      • Special Vehicle
    • Hydraulic Pump Parts
      • Parker Series
      • Komatsu Excavator Series
      • Hitachi Series
      • Rexroth Series
      • Sauer Danfoss Series
      • Uchida Series
      • Messori Series
      • Kayaba Series
      • Toshiba Series
      • Nachi Series
      • Eaton Vickers Series
      • Linde Series
      • Caterpillar Series
      • Kawasaki Series
      • Kobelco/Kato Series
      • Hawe Series
      • Sumitomo Series
    • Hydraulic Tools
      • Flange Tools
      • Hydraulic Lifting tools
        • Hydraulic pump
        • Hydraulic Cylinder/Jack
        • Hydraulic Professional Tools
      • Bolting Tools
        • Hydraulic Tensioners
        • Hydraulic Torque Wrench Pumps
        • Torque wrenches
      • Hydraulic Components
      • Electric Power Tools
    • Hydraulic System
    • Hydraulic Manifolds
    • Hydraulic Winch
    • Electro Hydraulic Actuators
  • APPLICATIONS
    • MOBILE
    • AGRICULTURE
    • INDUSTRIAL
    • ENERGY
    • FOOD & BEVERAGE
    • OIL & GAS
  • DOWNLOAD
    • Best PDF
  • CONTACT US
  • BLOG
HOME > BLOG

hydraulic system for pressure mounted hydraulic motor

Author:SAIVS Time:2022-11-18 Click:

v2-12bfd7144fdb8c09edcf4df95e939a4f_1440w.jpg


(1) Host functional structure

During the assembly of machine parts, there is often a pressing process for bushing parts. Pressing processes are often arranged between assembly lines. In order to adapt to the high-speed and high-efficiency process rhythm of assembly line, press-mounting hydraulic press is usually required to have high speed (generally up to 10 m/min), light pressure (generally at 10-50 kN) and reliable energy-saving performance. However, common hydraulic press is universal, but its speed and efficiency often can not meet the requirements. The hydraulic press is mainly used for pressing and assembling connecting rod pins of assembly line of engine for agricultural vehicles. The Hydraulic System of speed-up cylinder supplied by fixed displacement pump has met the above requirements and achieved satisfactory results in production.

(2) Hydraulic system and its working principle

Figure 2-33 shows the schematic diagram of the hydraulic system of the connecting rod pin press. The actuator of the system is the acceleration Hydraulic Cylinder 13, which is composed of a large cylinder (piston cylinder) and a small cylinder (piston cylinder) (the piston is fixed to the cylinder head of the large cylinder). The piston rod of the large cylinder acts as the cylinder cylinder of the small cylinder simultaneously, thus forming three cavities A, B and C with different working areas. Under the same input flow condition, different working speeds can be obtained by changing the working chamber of the acceleration cylinder and the working mechanism (pressure head) driven by the acceleration cylinder. Therefore, the system uses a fixed hydraulic pump 1 to supply oil. Relief valve 3 is used to limit the maximum operating pressure of the system for safety protection.

The work cycle completed by the hydraulic system is shown in Fig. 2-34. The downward and upward movement of the head driven by the hydraulic cylinder is controlled by the three-position four-way solenoid change-over valve 4. The hydraulic pump can also be unloaded by the M-type neutral function of the valve 4. The system adopts the mode of opening pump and holding pressure (holding pressure can be remotely regulated by relief valve 10 connected by remote control port of pilot relief valve 1l); Pressure release is achieved by a hydraulic control check valve 14 with an unloading valve center. Relief valve 7 acts as backpressure. The supply pressure of the hydraulic pump can be observed by the pressure gauge 6 through the pressure gauge switch 5 and the back pressure of the cylinder by the pressure gauge 9.

The oil flow path of the system under each operating condition is as follows.

1) Fast downward (near workpiece) energization of solenoid 1YA causes the change-over valve 4 to switch to the left position. The pressure oil of hydraulic pump 1 enters cavity A of accelerator cylinder 13 through the change-over valve 4. Because of the small area of this cavity, the piston rod drives the pressure head to go down quickly and approach the workpiece. At the same time, the secondary oil tank 15 above the cylinder fills the fluid through cavity B of 14-way cylinder of hydraulic control check valve. The oil in cylinder C chamber overcomes the back pressure of relief valve 7 and is discharged back to tank through valve 4.

2) Pressure retaining When the workpiece is in place, the hydraulic pump continues to supply oil to cavities A and B of the cylinder. The system maintains pressure to keep the workpiece in pressed state. Pressure retaining value is set by relief valves 9 and 11. During pressure retaining process, excess oil in the cylinder overflows back to the main tank through valve 3 high pressure.

3) After pressure relief and fast return (up) pressure retaining, solenoids 1YA and 3YA are cut off, 2YA are energized, valves 4 and 12 are switched to right and left positions respectively. Pressure oil of hydraulic pump 1 opens the pressure retaining chamber of hydraulic control check valve 14 to cylinder to release pressure. After reaching a certain pressure value, the pressure oil of hydraulic pump enters the C chamber of cylinder via valve 4 and valve 8, and drives the pressure head to go up quickly. The oil of A chamber is discharged directly to the main oil tank 16 via valve 4. The oil in chamber B is returned to the secondary tank 15 via the pilot-opened hydraulic check valve 14 and the excess oil is returned to the main tank via the overflow chamber of the secondary tank.

4) When the stop head returns to its original position, the solenoid 2YA is powered off, the valve 4 returns to its neutral position, the accelerator cylinder stops, and the hydraulic pump unloads to complete a work cycle.

(3) Technical characteristics

1) The head is driven by the acceleration cylinder, with the same speed of advance and retreat; With a fixed displacement pump oil source, the flow rate of the hydraulic pump is determined at a slow-forward speed (which is also the fast-forward flow rate of the cylinder). The flow specification and driving power of the hydraulic pump are greatly reduced compared with those of a conventional hydraulic cylinder system (see Table 2-11). The area of the three oil chambers is determined by load and ratio of speed to speed (the piston diameter of the cylinder is determined by the compressive loading force and the selected hydraulic system pressure; the piston diameter is determined by the ratio of speed to speed; and the piston rod diameter is determined by the same rate of speed to speed).

2) Elimination of throttling elements, no excess flow during operation of the system, thus improving volumetric efficiency; The working pressure of the hydraulic pump always follows the change of the load pressure, and the flow rate of the pipeline does not increase when the cylinder rises and falls rapidly. Except in the holding pressure stage, the pressure loss is small (ignoring the loss of the pipeline). Therefore, reactive power loss and heating in operation of the system are reduced, and energy-saving effect is achieved.

3) The fast and slow speed changes are obtained by changing the effective action area of the accelerator cylinder in the lifting cycle and the function of back Pressure Valve. As a result, the impact and vibration during speed change are small and the operation is smooth and high.

(4) Technical parameters (see Table 2-11)

v2-d05759c4bee56fa04fb6d4d8447973fe_720w.jpg

Table 2-11 Technical parameters of hydraulic system for connecting rod pin press

Project

parameter

Company

Host

Pressing force

40

KN

Fast rising and lowering speed

7.2

M/min

Press-fit speed

1.5

Hydraulic system

Working pressure

7

MPa

Maximum flow rate

9.6 (45.8 for normal cylinders)

L/min

Hydraulic cylinder

Piston diameter

90

Mm

Piston rod diameter

80

Piston diameter

40

Tag: Hydraulic System Hydraulic motor Pressure Mounted

Random Recommend

  • operation of hydraulic stretcher
  • The Essential Guide to Daily Pump Maintenance
  • Correct use of hydraulic torque wrench
  • Explanation of the latest hydraulic system design methods in 2022
  • How they affect Hydraulic Cylinder speed
  • Vibration and Noise in Hydraulic Systems: Causes, Effects, Control Strategies
  • What is the function of hydraulic oil pump in mining production?
  • Log No. 16:Hollow torque wrenches To Taiwan Customer
  • Selection of hydraulic solenoid change-over valve
  • How much do you know about the function of Parker proportional valves?

Related Products

Hydraulic Cylinder for Forklift

Hydraulic Cylinder for Forklift

Ultra-Low Pulse Vickers Eaton Double 20V Vane Pump

Ultra-Low Pulse Vickers Eaton Double 20V Vane Pump

Rexroth Servo selonoid valve 4WRLE10/16/25/35 Series

Rexroth Servo selonoid valve 4WRLE10/16/25/35 Series

SHWD60,38463Nm,Low Profile  Hydraulic Torque Wrench

SHWD60,38463Nm,Low Profile Hydraulic Torque Wrench

High-Quality Hydraulic Torque Wrench for Precise Bolt Tightening

High-Quality Hydraulic Torque Wrench for Precise Bolt Tightening

SUN hydraulics DKDSXHN Cartridge valve

SUN hydraulics DKDSXHN Cartridge valve

V30D45/V30D95/V30Z95/V30D250 HAWA/V30D250 HAWA Hydraulic Replacement Spare Parts

V30D45/V30D95/V30Z95/V30D250 HAWA/V30D250 HAWA Hydraulic Replacement Spare Parts

hydaulic cylinder for agriculture

hydaulic cylinder for agriculture

EATON VICKERS PVM Series straight axle variable displacement pump

EATON VICKERS PVM Series straight axle variable displacement pump

Rexroth Series Hydraulic Pump A11VO Parts With  Spare Parts Repair Kit

Rexroth Series Hydraulic Pump A11VO Parts With Spare Parts Repair Kit

  • ABOUT US

    • Honor
    • Manufacturing Capacity
    • Privacy Policy
    • Terms of Service
    • FAQ
  • PRODUCTS

    • Hydraulic Pumps
    • Hydraulic Motors
    • Hydraulic Valves
    • Planetary Gearboxes
    • Hydraulic Cylinder
    • Hydraulic Power Units
    • Hydraulic Pump Parts
    • Hydraulic Tools
    • Hydraulic System
    • Hydraulic Manifolds
    • Hydraulic Winch
    • Electro Hydraulic Actuators
  • APPLICATIONS

    • MOBILE
    • AGRICULTURE
    • INDUSTRIAL
    • ENERGY
    • FOOD & BEVERAGE
    • OIL & GAS
  • CONTACT US

    NO. 626 Yuncai Road,

    Yunlong Town, Yinzhou,

    Ningbo, Zhejiang, China.

    +86-574-88188161
    +8613905748980

    Monday - Friday:

    8:30 AM to 5:30 PM

    seo1@saivs.com

    Saivs industrial twitter youtube linkedin pinterest
Copyright © 2012-2025 Ningbo Saivs Machinery Co.,ltd. 
TAGS  SiteMap