Rotatable Head Cable Cutter Technical Data: Item No: ECSB-65C Cutting range: Below Φ65 Cu-Al Cable and Armored cable Size: 565*70*182mm Weight: approx. 5.65kg Package: steel case Usage: Cu-Al Cable, Armored cable The main cutting force of the rotatable head cable cutter comes from the blade, which is fixed by two screws and splints. In the […]
Hydraulic Wire Rope Crimping Tool for Terminal Cable Lug
Item No: ECPB-630H
Crimping range: Brozen ends 150-630 mm2, Alu. ends 185-500 mm2.
Crimping force: 110KN
Crimping type: hexagon crimping
Weight approx.: 5.6 kg
Package: Steel case
Standard Setting: 150,185,240,300, 400, 500, 630mm2
Note: Pump isn’t included, but can be selected as required.
Hydraulic Wire Rope Crimping Tool is a necessary tool for wire connection and crimping in the construction and maintenance of power lines.
Usage of Hydraulic Wire Rope Crimping Tool:
1. check whether the pressed terminal matches the wire specification.
2. Select the mold to be pressed. For example, if the terminal specification to be pressed is 240mm2, select the upper and lower mold of 240mm2.
3. Install the die into the piston and die holder.
4. Use method of hydraulic pump: tighten the oil inlet and return switch in clockwise direction and repeatedly shake the handle to look at the mold. When the upper and lower mold touch each other, it means that the pressing is finished. If the user does not pay attention to continue shaking, there is a click sound in the pump, which is the opening of the safety protection device, and the piston stops moving. At this time, turn the oil inlet and return switch in counterclockwise direction, and the piston returns Original location. Note: the mold can not be pressed without being installed. To avoid damage to the piston and jaw.