Rotatable Head Cable Cutter Technical Data: Item No: ECSB-65C Cutting range: Below Φ65 Cu-Al Cable and Armored cable Size: 565*70*182mm Weight: approx. 5.65kg Package: steel case Usage: Cu-Al Cable, Armored cable The main cutting force of the rotatable head cable cutter comes from the blade, which is fixed by two screws and splints. In the […]
Cordless Battery Wire Cutting Tool
Item No: EBSE-65C / EBSE-85C
Crimping force: 60KN
Crimp / charge: 130times(Cu 150mm2)
Cutting range: under Φ65/ under Φ85 copper aluminum cable or armored cable
Charging time: 2 hours
Package: plastic box
Sealing ring of cylinder: 1set
Sealing ring of valve: 1set
Super solid design
Shear armored copper and aluminum cables
Automatic pressure relief and reset
Manual pressure relief if necessary.
The charging cable can be cut quickly, which is suitable for high-voltage PE, telephone lines, etc. the main application places are the mechanical equipment required by various infrastructure projects such as electric power, steel, machinery plant, etc. The working principle of the Cordless Battery Wire Cutting Tool is to drive the screw in the shell through the electric drive device, and screw with the end of the transmission mechanism hinged in the shell. The rotation of the screw is converted into the winding motion of the transmission mechanism through the screw joint coordination, so as to drive the cutting edge of the cutter head to open and close, so as to realize automatic cutting. As the charging cable scissors are more and more important in our life, many places need to use them to solve problems, so choosing a good tool is a problem that we must solve, because there are many kinds of charging cable scissors.
In case of emergency when we use the Cordless Battery Wire Cutting Tool and need to turn off the liquid delivery, we should strictly implement the operation regulations of turning off the liquid delivery in the hydraulic station to avoid equipment and personal accidents. The working oil pressure in the station shall not be lower than 4.8mpa, and the liquid level in the reservoir shall not be lower than 600mm scale, otherwise, it shall be inflated or replenished. When the machine is stopped, the solenoid valve of each action shall be at the required position. With the continuous development of the national economy, cables need to be laid on various construction sites. At this time, a good tool can improve work efficiency and reduce the labor intensity of operators. The emergence of the rechargeable cable cutter just makes up for this gap. The rechargeable cable cutter is a kind of rechargeable cable cutter with electric mode. Now the rechargeable cable cutter uses lithium battery Box AC220V plug-in power supply in two modes. No matter the strength, convenience and firmness are stronger than ordinary scissors, which are specially used for cutting cables.