Rotatable Head Cable Cutter Technical Data: Item No: ECSB-65C Cutting range: Below Φ65 Cu-Al Cable and Armored cable Size: 565*70*182mm Weight: approx. 5.65kg Package: steel case Usage: Cu-Al Cable, Armored cable The main cutting force of the rotatable head cable cutter comes from the blade, which is fixed by two screws and splints. In the […]
Battery Powered Cable Cutting Tool
Item No: EBSE-30C
Crimping force: 60KN
Crimp / charge: 130times(Cu 150mm2)
Cutting range: under Φ30 copper aluminum cable or armored cable
Charging time: 2 hours
Package: plastic box
Sealing ring of cylinder: 1set
Sealing ring of valve: 1set
Super solid design
Shear armored copper and aluminum cables
Automatic pressure relief and reset
Manual pressure relief if necessary.
At present, Battery Powered Cable Cutting Tool is widely used in riveting of electromechanical and light industrial products, such as automobile, aviation, railway, refrigeration, elevator, switch, instrument, furniture, decoration, etc. In order to solve the problems of metal sheet, thin pipe welding nut fusible, tapping internal thread easy to slip and so on, it can be riveted without tapping internal thread, no need to weld the nut of the riveting products, riveting firm efficiency is high, easy to use. If the nut of a product needs to be installed on the outside, and the space inside is narrow, so that the indenter of the sub riveter can not enter into the process of pressing riveting, and the method of budding can not meet the strength requirements, then pressing riveting and expanding riveting are not feasible. Riveting must be applied to the fastening field of plates and pipes (0.5mm-6mm) of various thicknesses. Pneumatic or manual riveting gun can be used for one-time riveting, which is convenient and firm; instead of traditional welding nuts, it can make up for the shortcomings of sheet metal, thin pipe welding, welding nuts are not smooth, etc.
As a tool to cut off all kinds of wires, the Battery Powered Cable Cutting Tool is mainly used to cut off the steel cored aluminum strand, steel strand, insulated wire, etc. in the electric power construction. It is strictly prohibited to use the charging cable cutter beyond the scope and load. All kinds of hand tools have different rated strength. When using the tools, the varieties and specifications shall be reasonably selected according to the actual needs. It is not allowed to replace the big ones with the small ones, and it is not allowed to cut the items whose hardness is greater than the charging cable scissor mouth, so as to avoid unnecessary losses. The scissor head of the charging type cable cutter is made of high-quality spring steel, with high hardness and toughness. The cutting edge is sharp and the resistance of shearing is small. Even if the scissor head has such a good shearing property, it does not mean that the scissor head is invincible. If the material to be cut is beyond the bearing range of the charging cable scissor head, the service life of the scissor head will shrink. The charging cable cutter is easy to be blunt and the blade is misplaced when it is used for a long time. Pay attention to check and polish it in daily use to keep the blade sharp.